All Implemented Interfaces:
```
public class PulsarSettings

                    
```
The PulsarSettings class defines a convenient interface to control the behavior of PulsarRPA.
For example, to run multiple temporary browsers in headless mode, which is usually used in the spider scenario, you can use the following code:
```
PulsarSettings
   .headless()
   .maxBrowsers(4)
   .maxOpenTabs(12)
   .enableUrlBlocking()
```
The above code will:
- Run the browser in headless mode
- Set the number of privacy contexts to 4
- Set the max number of open tabs in each browser context to 12
- Enable url blocking
If you want to run your system's default browser in GUI mode, and interact with the webpage, you can use the following code:
```
PulsarSettings.withSystemDefaultBrowser().withGUI().withSPA()
```
The above code will:
- Use the system's default browser
- Run the browser in GUI mode
- Set the system to work with single page application

Nested Class Summary

Nested Classes
Modifier and Type	Class	Description

Field Summary

Fields
Modifier and Type	Field	Description

Constructor Summary

Constructors
Constructor	Description
`PulsarSettings()`

Enum Constant Summary

Enum Constants
Enum Constant	Description

Method Summary

Modifier and Type	Method	Description
`final PulsarSettings`	`withSystemDefaultBrowser()`	Use the system's default Chrome browser, so PulsarRPA visits websites just like you do.
`final PulsarSettings`	`withSystemDefaultBrowser(BrowserType browserType)`	Use the system's default browser with the given type, so PulsarRPA visits websites just like you do.
`final PulsarSettings`	`withDefaultBrowser()`	Use the default Chrome browser.
`final PulsarSettings`	`withDefaultBrowser(BrowserType browserType)`	Use the default Chrome browser.
`final PulsarSettings`	`withPrototypeBrowser()`	Use google-chrome with the prototype environment, any change to the browser will be kept.
`final PulsarSettings`	`withPrototypeBrowser(BrowserType browserType)`	Use the specified browser with the prototype environment, any change to the browser will be kept.
`final PulsarSettings`	`withSequentialBrowsers()`	Use sequential browsers that inherits from the prototype browser’s environment.
`final PulsarSettings`	`withSequentialBrowsers(Integer maxAgents)`	Use sequential browsers that inherits from the prototype browser’s environment.
`final PulsarSettings`	`withTemporaryBrowser()`	Use a temporary browser that inherits from the prototype browser’s environment.
`final PulsarSettings`	`withTemporaryBrowser(BrowserType browserType)`	Use a temporary browser that inherits from the prototype browser’s environment.
`final PulsarSettings`	`withGUI()`	Launch the browser in GUI mode.
`final PulsarSettings`	`headed()`	Launch the browser in GUI mode.
`final PulsarSettings`	`headless()`	Launch the browser in headless mode.
`final PulsarSettings`	`supervised()`	Launch the browser in supervised mode.
`final PulsarSettings`	`maxBrowsers(Integer n)`	Set the max number of agents
`final PulsarSettings`	`maxOpenTabs(Integer n)`	Set the max number to open tabs in each browser context
`final PulsarSettings`	`withSPA()`	Tell the system to work with single page application.
`final PulsarSettings`	`withInteractSettings(InteractSettings settings)`	Use the specified interact settings to interact with webpages.
`final PulsarSettings`	`enableUrlBlocking()`	Enable url blocking.
`final PulsarSettings`	`enableUrlBlocking(Float probability)`	Enable url blocking with the given probability.
`final PulsarSettings`	`disableUrlBlocking()`	Disable url blocking.
`final PulsarSettings`	`blockImages()`	Block all images.
`final PulsarSettings`	`enableProxy()`	Enable proxy if available.
`final PulsarSettings`	`disableProxy()`	Disable proxy.
`final PulsarSettings`	`enableOriginalPageContentAutoExporting()`	Export all pages automatically once they are fetched.
`final PulsarSettings`	`enableOriginalPageContentAutoExporting(Integer limit)`	Export at most limit pages once they are fetched.
`final PulsarSettings`	`disableOriginalPageContentAutoExporting()`	Disable original page content exporting.
`final PulsarSettings`	`withLLMProvider(String provider)`	LLM provider
`final PulsarSettings`	`withLLMName(String name)`	LLM name
`final PulsarSettings`	`withLLMAPIKey(String key)`	LLM API key

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - PulsarSettings
```
PulsarSettings()
```
- Method Detail
  - withSystemDefaultBrowser
```
 final PulsarSettings withSystemDefaultBrowser()
```
    Use the system's default Chrome browser, so PulsarRPA visits websites just like you do. Any change to the browser will be kept.
  - withSystemDefaultBrowser
```
 final PulsarSettings withSystemDefaultBrowser(BrowserType browserType)
```
    Use the system's default browser with the given type, so PulsarRPA visits websites just like you do. Any change to the browser will be kept.
    NOTICE: PULSAR_CHROME is the only supported browser currently.
  - withDefaultBrowser
```
 final PulsarSettings withDefaultBrowser()
```
    Use the default Chrome browser. Any change to the browser will be kept.
  - withDefaultBrowser
```
 final PulsarSettings withDefaultBrowser(BrowserType browserType)
```
    Use the default Chrome browser. Any change to the browser will be kept.
    NOTICE: PULSAR_CHROME is the only supported browser currently.
  - withPrototypeBrowser
```
 final PulsarSettings withPrototypeBrowser()
```
    Use google-chrome with the prototype environment, any change to the browser will be kept.
  - withPrototypeBrowser
```
 final PulsarSettings withPrototypeBrowser(BrowserType browserType)
```
    Use the specified browser with the prototype environment, any change to the browser will be kept.
    PULSAR_CHROME is the only supported browser currently.
  - withSequentialBrowsers
```
 final PulsarSettings withSequentialBrowsers()
```
    Use sequential browsers that inherits from the prototype browser’s environment. The sequential browsers are permanent unless the context directories are deleted manually.
    PULSAR_CHROME is the only supported browser currently.
    
    Returns:
    
    the PulsarSettings itself
  - withSequentialBrowsers
```
 final PulsarSettings withSequentialBrowsers(Integer maxAgents)
```
    Use sequential browsers that inherits from the prototype browser’s environment. The sequential browsers are permanent unless the context directories are deleted manually.
    PULSAR_CHROME is the only supported browser currently.
    
    Parameters:
    
    maxAgents - The maximum number of sequential privacy agents, the active privacy contexts is chosen from them.
    
    Returns:
    
    the PulsarSettings itself
  - withTemporaryBrowser
```
 final PulsarSettings withTemporaryBrowser()
```
    Use a temporary browser that inherits from the prototype browser’s environment. The temporary browser will not be used again after it is shut down.
  - withTemporaryBrowser
```
 final PulsarSettings withTemporaryBrowser(BrowserType browserType)
```
    Use a temporary browser that inherits from the prototype browser’s environment. The temporary browser will not be used again after it is shut down.
    PULSAR_CHROME is the only supported browser currently.
  - withGUI
```
 final PulsarSettings withGUI()
```
    Launch the browser in GUI mode.
  - headed
```
 final PulsarSettings headed()
```
    Launch the browser in GUI mode.
  - headless
```
 final PulsarSettings headless()
```
    Launch the browser in headless mode.
  - supervised
```
 final PulsarSettings supervised()
```
    Launch the browser in supervised mode.
  - maxBrowsers
```
 final PulsarSettings maxBrowsers(Integer n)
```
    Set the max number of agents
  - maxOpenTabs
```
 final PulsarSettings maxOpenTabs(Integer n)
```
    Set the max number to open tabs in each browser context
  - withSPA
```
 final PulsarSettings withSPA()
```
    Tell the system to work with single page application. To collect SPA data, the execution needs to have no timeout limit.
  - withInteractSettings
```
 final PulsarSettings withInteractSettings(InteractSettings settings)
```
    Use the specified interact settings to interact with webpages.
  - enableUrlBlocking
```
 final PulsarSettings enableUrlBlocking()
```
    Enable url blocking. If url blocking is enabled and the blocking rules are set, resources matching the rules will be blocked by the browser.
  - enableUrlBlocking
```
 final PulsarSettings enableUrlBlocking(Float probability)
```
    Enable url blocking with the given probability. The probability must be in 0, 1.
  - disableUrlBlocking
```
 final PulsarSettings disableUrlBlocking()
```
    Disable url blocking. If url blocking is disabled, blocking rules are ignored.
  - blockImages
```
 final PulsarSettings blockImages()
```
    Block all images.
  - enableProxy
```
 final PulsarSettings enableProxy()
```
    Enable proxy if available.
  - disableProxy
```
 final PulsarSettings disableProxy()
```
    Disable proxy.
  - enableOriginalPageContentAutoExporting
```
 final PulsarSettings enableOriginalPageContentAutoExporting()
```
    Export all pages automatically once they are fetched.
    The export directory is under AppPaths.WEB_CACHE_DIR. A typical export path is:
    AppPaths.WEB_CACHE_DIR/default/pulsar_chrome/OK/amazon-com
    C:\Users\pereg\AppData\Local\Temp\pulsar-pereg\cache\web\default\pulsar_chrome\OK\amazon-com
  - enableOriginalPageContentAutoExporting
```
 final PulsarSettings enableOriginalPageContentAutoExporting(Integer limit)
```
    Export at most limit pages once they are fetched.
    The export directory is under AppPaths.WEB_CACHE_DIR. A typical export path is:
    AppPaths.WEB_CACHE_DIR/default/pulsar_chrome/OK/amazon-com
    C:\Users\pereg\AppData\Local\Temp\pulsar-pereg\cache\web\default\pulsar_chrome\OK\amazon-com
  - disableOriginalPageContentAutoExporting
```
 final PulsarSettings disableOriginalPageContentAutoExporting()
```
    Disable original page content exporting.
  - withLLMProvider
```
 final PulsarSettings withLLMProvider(String provider)
```
    LLM provider
  - withLLMName
```
 final PulsarSettings withLLMName(String name)
```
    LLM name
  - withLLMAPIKey
```
 final PulsarSettings withLLMAPIKey(String key)
```
    LLM API key

Class PulsarSettings

Nested Class Summary

Field Summary

Constructor Summary

Enum Constant Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

PulsarSettings

Method Detail

withSystemDefaultBrowser

withSystemDefaultBrowser

withDefaultBrowser

withDefaultBrowser

withPrototypeBrowser

withPrototypeBrowser

withSequentialBrowsers

withSequentialBrowsers

withTemporaryBrowser

withTemporaryBrowser

withGUI

headed

headless

supervised

maxBrowsers

maxOpenTabs

withSPA

withInteractSettings

enableUrlBlocking

enableUrlBlocking

disableUrlBlocking

blockImages

enableProxy

disableProxy

enableOriginalPageContentAutoExporting

enableOriginalPageContentAutoExporting

disableOriginalPageContentAutoExporting

withLLMProvider

withLLMName

withLLMAPIKey